• 450 amps at 100% duty cycle

• 500 amps at 60% duty cycle

• Tested at temperatures up to 40°C

• Plenty of AC 240V & 415V auxiliary power
   – 20,000 watts.

Standard Equipment

• Simple Controls – Keep training time to a minimum with the straight forward control panel of the Vantage 575.

• VRD Device (for additional operator safety)
  46 horsepower liquid-cooled 4 cylinder Cummins B3.3 engine.

• Single-sided engine access for routine maintenance.
  Large 95 litre fuel tank provides run time for an extended day – 13 hours of welding at 450A / 40V / 100% duty cycle output, or 31 hours at high idle.

• Engine hour meter for scheduled maintenance.

• Output at welding terminals controlled by electronic contactor. Can be switched to “Weld Terminals On” or to “Remotely Controlled”.

• Automated Remote Control Capability

• 14-pin connector for Lincoln wire feeders LN-7, LN-8, LN-23P and LN-742.

• Two Vantage 575 units can be paralleled in the CC-Stick Mode to increase output.